Eliminate the single most common cause of premature toilet tank component failure with this simple 200 micron particulate screen filter. Unfiltered water lines allow small sediment particles to enter through the tank filler valve, eroding the valve seals and then settling in the tank. These particles are very abrasive and once in tank, swirl around during flushes and further erode the various tank seals and flush valve components. This erosion effect shortens their service life and ultimately leads to annoying leaks at the tank bolts or seeping at the flush flapper. The problem is most common in homes with well water, but can also occur in city water lines where older plumbing is not sealed well.

If you see sand, dirt, rust or other sediment particles collecting in the bottom of your tank, then this screen filter is the solution.

Note that this filter ONLY captures particles and DOES NOT treat water conditions such as silt, hardness, discoloration or staining. Those types of problems require professional services and the installation of more complex water treatment systems.

Installs quickly and easily by hand in most cases – simply turn off the water, unscrew the existing water line, install the InLine Screen Filter and then reattach the water line onto it. In some cases, a standard adjustable wrench or slip lock pliers may be required to remove the water line. Cleaning is quick and easy by simply twisting off the filter cap, flushing out the debris and replacing the cap.

Standard 7/8″ “ballcock” threads (common to most US toilet filler valves) male-to-female inline with 1 filler-side seal washer. FILTER ASSEMBLY INCLUDES HOUSING WITH 7/8″ MALE-FEMALE FITTINGS AND FILTER AS SHOWN. PLEASE CHECK YOUR FITTING SIZING PRIOR TO ORDERING.

SEE OPTIONAL 90 DEGREE ELBOW – SOLD SEPARATELY