- Make sure this fits by entering your model number.
- Fits Standard 2″ Toilets with 2 3/8″ to 2 3/4″ Tank Drain and 5/8″ to 3/4″ Square Button Mount Hole or 1 1/2″ Round Lid Hole
- Euro-Style Push Button Actuator is Modern and Easy to Operate – Eliminates Repeated Flushing
- Saves up to 10,000 Gallons per Year for an Average Family of Four – Pays For Inself in Months
- Everything Included: Dual-Flush Valve, Tank Filler, Bowl Valve, Gasket, Bolts, Labels, Instructions
* FITS STANDARD 2″ DRAIN TWO PIECE TOILETS WITH 2 3/8″ to 2 3/4″” DIAMETER TANK DRAIN HOLE AND 5/8″ TO 3/4″ SQUARE BUTTON MOUNT HOLE OR 1 1/2″ ROUND LID MOUNT HOLE *
FlushSaver Dual-Flush DIY Conversion Kit is EASY to operate for anyone because of its modern European-style Push Button actuator. These kits replace your standard wasteful and leaky flapper mechanism with an adjustable, dual-action piston and seal evacuator column. The Push Button actuator, which replaces the standard flush lever, is split into a smaller button for those little “Number One” flushes and a larger button for higher water volume “Number Two” flushes.
Both the “small flush” and “regular flush” release enough water to fully cycle and empty the bowl, but the small flush is less aggressive and uses 1/3 less water . . . adding up to over 10,000 gallons saved for an average family of four. Further, both cycles are adjustable to suit your particular tank size and water use preferences.
EVERYTHING is INCLUDED to fully replace ALL of the parts inside the tank as shown. The leaky and wasteful flapper mechanism is replaced with a MODERN adjustable, dual-action piston and seal evacuator column, while the old-style ballcock valve is replaced with a QUIET and SERVICABLE filler valve. The kit also includes a new tank gasket and non-corroding STAINLESS STEEL 3 bolt set for a complete tank overhaul job.